Flooring Installation in Miri

Yes. Solid and engineered wood (and to a lesser degree laminate) should sit in the room where it will be installed for 48-72 hours so it adjusts to local temperature and humidity. Skipping this step is a common cause of gapping and buckling months later. A good installer will schedule delivery a few days before fitting.

Click-lock laminate and vinyl are realistic DIY projects if the subfloor is flat and rooms are simple rectangles. Glue-down vinyl, nail-down hardwood and tile are much less forgiving and usually worth paying for. Note that some manufacturers only honour warranties when a professional installs the product, and mistakes in prep are expensive to undo.

Waterproof materials: vinyl plank/tile, ceramic or porcelain tile, or specifically water-rated laminate. Standard laminate and solid wood swell when water gets into joints, so most installers will advise against them in wet rooms even if you like the look.

A single room in click-lock laminate or vinyl is typically done in a day. A whole apartment or house takes 2-5 days depending on area, furniture moving, and how much old flooring must come out. Add a day or more if the subfloor needs levelling compound, and 2-3 days of acclimatisation before wood products are laid.

Vinyl click flooring typically runs RM4-RM10 per square foot installed (materials around RM3.50-RM5.50 plus labour), laminate RM5-RM12, and solid or engineered timber RM12-RM30. Watch the wear layer — 0.3mm+ is the sensible minimum for homes.

Not for overlaying vinyl or laminate in most cases. Condos require management approval and a refundable renovation deposit; local-council (DBKL/MBPJ etc.) permits apply to structural renovations, not floor coverings.