Flooring Installation in Cheras

Laminate and click-lock vinyl plank are usually cheapest overall: low material cost plus a fast floating installation that needs no glue or nails. Sheet vinyl can be even cheaper per unit but needs a very flat subfloor. Carpet is comparable but is normally quoted by carpet fitters rather than hard-flooring installers.

It depends mostly on the material. Laminate and vinyl (LVP/LVT) are the cheapest to buy and fastest to fit; engineered wood costs roughly double; solid hardwood and premium tile cost the most. As a rule of thumb labour is 30-50% of the total, with materials, underlay, trims and subfloor prep making up the rest. Get quotes priced per square metre or square foot so you can compare like for like.

Most quote by area (per square metre or square foot) for the installation itself, with fixed add-ons for prep, removal and trims. Very small jobs are often charged as a half-day or day minimum, so a tiny room can cost disproportionately more per unit of area.

Waterproof materials: vinyl plank/tile, ceramic or porcelain tile, or specifically water-rated laminate. Standard laminate and solid wood swell when water gets into joints, so most installers will advise against them in wet rooms even if you like the look.

Yes, noticeably. Setup, travel, tool time and material delivery are spread across a bigger area, and installers often discount larger jobs. Doing one room at a time is the most expensive way to floor a home and risks batch-colour differences between orders.

Vinyl click flooring typically runs RM4-RM10 per square foot installed (materials around RM3.50-RM5.50 plus labour), laminate RM5-RM12, and solid or engineered timber RM12-RM30. Watch the wear layer — 0.3mm+ is the sensible minimum for homes.

Not for overlaying vinyl or laminate in most cases. Condos require management approval and a refundable renovation deposit; local-council (DBKL/MBPJ etc.) permits apply to structural renovations, not floor coverings.