Bathroom Renovation in Kajang

Keep the existing layout, choose mid-range fittings from stocked lines rather than special orders, use large-format tiles only on feature areas, and paint rather than tile ceilings and upper walls. Do not economize on waterproofing, drainage falls, or the tiler's labour — those are the items whose failure costs multiples later.

Only in limited ways. Swapping a vanity, toilet, or taps in place works as standalone jobs, but anything touching the shower area, waterproofing, or tiling should be done in one hit — redoing tiles twice or breaking a waterproof membrane to add something later costs more than doing it together.

It can work on sound, well-bonded wall tiles and saves strip-out cost, but it fails on floors with movement, adds thickness that fouls doors and fittings, and hides the condition of the substrate and membrane. Most renovators strip back in wet areas — if a contractor proposes tile-over-tile in the shower zone specifically, treat it as a cost-cutting red flag.

Walk-in showers cost less to build than bath-plus-screen setups, use less space, and suit ageing-in-place. Keep at least one bathtub in the home if you may sell to families — in most markets a home with no bath at all narrows the buyer pool. If you have two bathrooms, the common answer is one of each.

Relocating a toilet means rerouting the soil pipe and adjusting floor levels; moving a shower means new drainage falls and full re-waterproofing. Either typically adds a meaningful share of the total budget and extra days of work. If your budget is tight, keeping the existing layout is the single most effective cost-saver.

Run every fixture: check drainage speed, look under the vanity for weeps, confirm the shower floor falls to the drain (pour a bucket and watch), check grout lines are even and silicone is continuous, and test the extractor fan. Photograph everything and get the waterproofing product and warranty terms in writing before releasing final payment.

2025-26 guides put basic upgrades at RM5,000-RM15,000 and mid-range remodels roughly RM15,000-RM40,000, with premium projects reaching RM55,000-RM90,000. Tiling runs RM10-30 per sq ft plus RM5-15 per sq ft for waterproofing.

Yes — the JMB or management corporation must approve the works, typically with a refundable renovation deposit, contractor registration at the guardhouse, and restricted working hours. Landed-home internal refits need no council permit unless walls or drainage change.