Bathroom Renovation in Galway

Only in limited ways. Swapping a vanity, toilet, or taps in place works as standalone jobs, but anything touching the shower area, waterproofing, or tiling should be done in one hit — redoing tiles twice or breaking a waterproof membrane to add something later costs more than doing it together.

Relocating a toilet means rerouting the soil pipe and adjusting floor levels; moving a shower means new drainage falls and full re-waterproofing. Either typically adds a meaningful share of the total budget and extra days of work. If your budget is tight, keeping the existing layout is the single most effective cost-saver.

If the renovation strips the shower area back to the substrate, waterproofing must be redone — a failed membrane is the most expensive bathroom defect there is, because the fix means demolishing finished tiling. Several countries regulate wet-area waterproofing explicitly. Never let a contractor tile directly over an old or damaged membrane.

A bathroom renovation touches plumbing, electrics, waterproofing, tiling, and carpentry. A bathroom specialist or small contractor who coordinates all of it is usually worth the margin unless you have renovation experience — sequencing errors between trades (tiler before the plumber finished rough-in, for example) are the classic self-managed failure.

A like-for-like refit usually needs no permit in Galway, but moving drainage, altering walls, or adding a new bathroom typically does under your local building rules — and electrical and plumbing work must be done by qualified or licensed trades in most countries. Ask your contractor to name the specific approval needed; see the country checklist on this page for what applies where you live.

A standard full renovation typically runs €9,000-€16,000, with budget refreshes from about €4,000-€6,000 and high-end projects €16,000-€40,000. Dublin prices sit toward the top; labour shortages keep quotes firm and lead times long.

Many Irish homes rely on electric showers because of low-pressure gravity-fed hot water systems. Replacing one like-for-like is a small job, but upgrading to a pumped or mains-pressure mixer shower means plumbing changes and possibly a new cylinder — budget for that decision early because it swings the total meaningfully.