Tiling in Sha Tin
Compare local tiling (泥水 works) pros in Sha Tin and get free quotes — no obligation, no call-backs you didn't ask for.
Typical price: HK$2,000–HK$70,000
Free, no obligation. Sign in with Google to send your request.
Tiling prices in Sha Tin
| Job size | Low | Typical | High |
|---|---|---|---|
| Kitchen backsplash Tile a standard backsplash, tiles excluded | HK$2,000 | HK$3,500 | HK$6,000 |
| Bathroom floor retile Hack and retile a bathroom floor with waterproofing | HK$8,000 | HK$15,000 | HK$25,000 |
| Full bathroom retile Hack, waterproof, flood test and retile floor plus walls | HK$30,000 | HK$45,000 | HK$70,000 |
How to hire a tiling pro in Hong Kong
- Tiling falls under 泥水 (wet trades) in HK renovation quotes — confirm the master's tiling portfolio specifically
- Register works with building management; hacking tiles is restricted to permitted hours
- Confirm waterproofing redo and a flood test for bathroom floors
- Get quotes per sq ft with hacking, disposal and screed itemized
- Licensed disposal of construction waste is required — confirm it's in the price
- Check platform reviews (HKDecoman, Toby)
Bathroom re-tiling in Hong Kong flats is non-structural and outside Buildings Department approval, but building management imposes registration, deposits and hacking-hours rules. Waterproofing failures cause inter-flat seepage disputes handled by the FEHD/BD Joint Office, so a flood test before tiling is standard good practice.
Budgeting first?
See the full breakdown of what drives tiling prices — job sizes, unit rates, and how to save.
Frequently asked questions
How long does tiling a bathroom take?
A full bathroom (floor plus walls) typically takes 3-5 days: prep and waterproofing first, then setting, then grouting after the adhesive cures. Add days if old tiles must come off or the substrate needs levelling. Rushing cure times is the classic cause of cracked grout later.
How do I find a good tiler in Sha Tin?
Ask tilers in Sha Tin for photos of finished wet rooms and floor-to-wall junctions — lippage (uneven tile edges), crooked grout lines and bad cuts around fittings are where cheap work shows. Good tilers also talk about substrate prep and waterproofing before they talk about tiles.
Should I buy the tiles or does the tiler supply them?
Either works, but you usually choose and buy tiles yourself and the tiler supplies adhesive, grout and trims. Order 10-15% extra for cuts and breakage (more for patterns and large formats) and keep leftovers for future repairs. Have tiles on site before the tiler starts.
Do wet areas need waterproofing before tiling?
Yes — tiles and grout are not waterproof; the membrane behind them is. Most countries mandate or strongly standardize wet-area waterproofing, and it must cure before tiling. If a bathroom quote doesn't mention waterproofing, that is the question to ask before anything else.
Can you tile over existing tiles?
Sometimes — if the old tiles are solidly bonded and the extra height works at doors and fittings, tiling over is legitimate and avoids messy removal. It fails when old tiles are drummy (hollow-sounding) or the wall can't take the weight. A good tiler taps and checks before promising either way.
What does retiling cost in Hong Kong?
Tiling labour runs roughly HK$40-90 per sq ft depending on format, with a full bathroom hack-and-retile including waterproofing commonly HK$30,000-60,000 in a typical flat. Quotes are per sq ft — always get the measured area in writing.
Free, no obligation. Sign in with Google to send your request.
How Handld works
- 1
Tell us what you need
Describe the job and where you are. It takes about a minute.
- 2
We match your request
Your request goes to local professionals who cover your area and service.
- 3
Compare quotes and choose
Pros reply with quotes. Compare, ask questions and hire on your terms — free for you.