Flooring Installation in Tai Po

Ask how long they have fitted your specific material, whether they carry public liability insurance, who does subfloor prep and what it costs, how they handle door trimming and thresholds, their lead time, and what workmanship warranty they give in writing. Two or three quotes from local installers in Tai Po is usually enough to see the fair market rate.

Laminate and click-lock vinyl plank are usually cheapest overall: low material cost plus a fast floating installation that needs no glue or nails. Sheet vinyl can be even cheaper per unit but needs a very flat subfloor. Carpet is comparable but is normally quoted by carpet fitters rather than hard-flooring installers.

Yes. Solid and engineered wood (and to a lesser degree laminate) should sit in the room where it will be installed for 48-72 hours so it adjusts to local temperature and humidity. Skipping this step is a common cause of gapping and buckling months later. A good installer will schedule delivery a few days before fitting.

Click-lock laminate and vinyl are realistic DIY projects if the subfloor is flat and rooms are simple rectangles. Glue-down vinyl, nail-down hardwood and tile are much less forgiving and usually worth paying for. Note that some manufacturers only honour warranties when a professional installs the product, and mistakes in prep are expensive to undo.

Waterproof materials: vinyl plank/tile, ceramic or porcelain tile, or specifically water-rated laminate. Standard laminate and solid wood swell when water gets into joints, so most installers will advise against them in wet rooms even if you like the look.

A single room in click-lock laminate or vinyl is typically done in a day. A whole apartment or house takes 2-5 days depending on area, furniture moving, and how much old flooring must come out. Add a day or more if the subfloor needs levelling compound, and 2-3 days of acclimatisation before wood products are laid.

Installed click vinyl typically runs HK$20-HK$60 per square foot, and engineered wood HK$40-HK$120 depending on veneer and brand. Small flats push per-foot rates up because minimum job charges are spread over less area.

For flooring alone, no government permit — but your building's management office almost certainly requires a renovation application, deposit, and set working hours. Public housing (HA) flats have their own approval lists and rules, so check before signing a contractor.