Fence Installation & Repair in Whampoa

Fencing is priced by length (per linear foot or metre) times the material you choose, plus gates, gradient and ground conditions. Material is the biggest swing: chain-link and basic timber sit at the bottom, composite, brick and wrought iron at the top. Always price the full run installed, not just the panels.

Ask for photos of recent fences in Whampoa and, ideally, an address you can drive past — fencing quality shows in post-setting and line, which you can see. Confirm they handle the permit/boundary check and get the length, material and gate count in writing before booking.

A standard residential run takes one to three days: posts set in concrete need to cure, so many installers do posts one day and panels the next. Rocky or sloped ground, many gates, or removing an old fence all add time. Wet weather that stops concrete curing is the usual delay.

Boundary responsibility depends on your deeds/title, not a universal rule — often each owner maintains one side, or costs are shared for a jointly-owned fence. Talk to your neighbour and check your title before building on a boundary; disputes over line and cost-sharing are the most common fencing headache.

Pressure-treated timber is the cheapest solid privacy option and the most common; chain-link is cheapest overall but offers no privacy; composite and vinyl cost more up front but need almost no maintenance. Choose on lifetime cost — a cheap timber fence you re-stain every two years can cost more over a decade than composite.

Installed metal fencing runs roughly HKD 500-1,400 per metre depending on material and finish, with a typical village-house run commonly HKD 20,000-60,000. Labour and access constraints push prices above regional norms.