Countertop Installation in Yuen Long San Hui

In Yuen Long San Hui, expect the national typical per square foot or metre for your chosen material, with an island, complex cut-outs and premium edging pushing the total up. Ask for the price templated and fitted, not just the slab.

Look for: material and thickness, templating (a precise measure of your cabinets), fabrication (cut-outs for sink and hob, edge profile), delivery, installation, sealing if natural stone, and removal/disposal of the old top. A slab-only price hides the fabrication and fitting that make up much of the cost.

After templating, fabrication takes about one to two weeks for stone; installation itself is usually a day. Plan for the gap between template and fit — you'll be without a worktop briefly, so coordinate with the rest of the kitchen work.

Dry-cutting engineered (quartz) stone releases silica dust that causes silicosis, a serious lung disease — which is why fabrication must use wet-cutting and proper controls. This is a real, regulated workplace hazard; reputable fabricators take it seriously (see country notes).

Cost is driven by material and area. Laminate is cheapest; granite and quartz sit in the middle; premium natural stone and sintered surfaces are dearest. Priced per square foot/metre or linear metre installed, with templating, cut-outs (sink, hob), edging and removal of the old top usually on top.

Quartz (engineered stone) is non-porous, consistent in colour and needs no sealing; granite is natural, each slab unique, and needs periodic sealing. Both are hard-wearing at similar price points. Choose quartz for low maintenance and uniform looks, granite for natural variation and heat resistance.

Stone countertops commonly run HK$500-1,800 per foot run supplied and fitted; a typical flat kitchen lands at HK$15,000-50,000 depending on material. Premium and large-island jobs sit higher.