How much does lighting installation cost in Hong Kong?
Free, no obligation. Sign in with Google to send your request.
Key takeaways
- Most lighting installation jobs in Hong Kong land between HK$400–HK$4,000 — known locally as light installation (燈飾安裝).
- Electrical work in Hong Kong falls under the Electricity Ordinance requiring Registered Electrical Workers for fixed installations; most flats have concrete slab ceilings, making anchor-mounted installation the norm.
- Prices below are researched national ranges, updated July 2026 — not quotes.
Lighting Installation prices by job size in Hong Kong
| Job size | Low | Typical | High |
|---|---|---|---|
| Replace 2-3 existing fittings Swap ceiling fittings on existing points, one visit | HK$400 | HK$700 | HK$1,200 |
| Downlights for living room (6 LED) Six LED downlights into false ceiling with wiring | HK$1,500 | HK$2,500 | HK$4,000 |
| Chandelier installation Heavy fitting anchored to concrete slab | HK$800 | HK$1,500 | HK$2,800 |
Per-unit rates
| Unit | Low | Typical | High |
|---|---|---|---|
| per fitting installed | HK$200 | HK$350 | HK$600 |
| labour per hour | HK$250 | HK$400 | HK$650 |
What affects the price
- Job size and scope — bigger or more complex jobs move you up the ranges above.
- Access and condition — hard-to-reach areas, older properties or neglected maintenance add labour time.
- Materials and quality level — where materials are involved, the grade you choose often matters more than labour.
- Urgency — same-day or out-of-hours work usually carries a premium.
- Where you live — large metros in Hong Kong typically run above the national range; smaller towns below it.
How to save
- Get at least three quotes and compare like-for-like scopes, not just totals.
- Be flexible on timing — off-peak slots are often cheaper.
- Bundle related tasks into one visit to spread call-out costs.
- Agree the scope in writing up front to avoid change-order surprises.
How to hire a lighting installation pro in Hong Kong
- Fixed electrical works in Hong Kong must be done by Registered Electrical Workers (REW) under the Electricity Ordinance
- Simple fitting swaps are commonly done by handyman services; circuit work needs an REW
- Confirm ceiling type — concrete slab ceilings need drilling and anchors; false ceilings need joist-mounted support
- Get per-fitting pricing and bundle installations
- For heavy chandeliers, confirm structure-rated mounting
- Get a receipt from a registered company
Red flags
- Circuit or consumer-unit work by unregistered workers
- Heavy fittings hung from false-ceiling boards alone
- No price agreement before drilling starts
- No receipt
How Handld researches prices
These are researched estimates, not quotes and not our transaction data. We compile ranges from published sources — national statistics, trade bodies and incumbent cost guides — normalise them to HKD, and adjust city pages by a population-based cost tier. Last updated July 2026. Basis: HK service platform rates (Toby); EMSD REW requirements.
Frequently asked questions
Why do my LED lights flicker or glow when off?
Common culprits: non-dimmable LEDs on a dimmer, leading-edge dimmers driving LED loads, switch-loop induced ghost voltage, or cheap drivers. An electrician can match the dimmer to the load or fit a bypass capacitor — usually a quick, inexpensive fix.
Is outdoor and garden lighting a bigger job than indoor?
Usually — it needs weatherproof (IP-rated) fittings, protected cable runs (buried or clipped), and often RCD/GFCI protection on the circuit. Low-voltage garden systems are cheaper to extend safely; mains-voltage outdoor work is firmly electrician territory.
What should I know about bathroom lighting?
Bathrooms have zoned rules: fittings near showers and baths must carry appropriate ingress protection (IP) ratings, and many jurisdictions restrict who may do the work. Choose IP44 or better near water and confirm the installer knows the zone requirements.
What is involved in adding a dimmer switch?
Swapping the switch is quick, but the dimmer must match the load type — LED lamps need trailing-edge dimmers and 'dimmable' rated bulbs, or you get flicker and buzz. Smart dimmers may also need a neutral at the switch, which older homes often lack.
Can a heavy chandelier hang from any ceiling?
No — standard ceiling boxes/hooks hold only a few kilograms. Heavier fittings need a rated support fixed to structure, and stairwell or double-height installs need scaffolding or specialist access. Tell the installer the fixture weight and location when getting quotes.
Why does ceiling type matter for light installation in Hong Kong flats?
Most HK ceilings are structural concrete: every fitting needs drilled anchors, and heavy chandeliers need expansion bolts into slab — false-ceiling boards alone cannot carry them. Quotes assume concrete drilling; renovated false ceilings may need backing checks first.
Free, no obligation. Sign in with Google to send your request.