Bathroom Renovation in Kowloon West End

It can work on sound, well-bonded wall tiles and saves strip-out cost, but it fails on floors with movement, adds thickness that fouls doors and fittings, and hides the condition of the substrate and membrane. Most renovators strip back in wet areas — if a contractor proposes tile-over-tile in the shower zone specifically, treat it as a cost-cutting red flag.

If the renovation strips the shower area back to the substrate, waterproofing must be redone — a failed membrane is the most expensive bathroom defect there is, because the fix means demolishing finished tiling. Several countries regulate wet-area waterproofing explicitly. Never let a contractor tile directly over an old or damaged membrane.

Around 10-20% is normal, sometimes more where custom vanities or imported fittings must be ordered up front — in that case pay the supplier invoice share, not a round 50%. Hold 5-10% back until the room has been used for a week or two and the snag list (grout gaps, silicone, door alignment) is closed.

Only in limited ways. Swapping a vanity, toilet, or taps in place works as standalone jobs, but anything touching the shower area, waterproofing, or tiling should be done in one hit — redoing tiles twice or breaking a waterproof membrane to add something later costs more than doing it together.

A standard full bathroom renovation typically runs HK$60,000-HK$130,000, with basic refreshes from about HK$30,000-HK$50,000 and high-spec projects HK$150,000-HK$350,000. Small bathroom footprints don't make it cheap — demolition, waterproofing, and licensed trades dominate the cost.

You are, as the flat owner — water seepage cases between flats are among Hong Kong's most common building disputes, handled via the Joint Office (FEHD/BD) and civil claims. Insist on a named waterproofing system, proper curing time, and a written warranty from your contractor; it's your main protection.