Bathroom Renovation near you in Hong Kong

Run every fixture: check drainage speed, look under the vanity for weeps, confirm the shower floor falls to the drain (pour a bucket and watch), check grout lines are even and silicone is continuous, and test the extractor fan. Photograph everything and get the waterproofing product and warranty terms in writing before releasing final payment.

It can work on sound, well-bonded wall tiles and saves strip-out cost, but it fails on floors with movement, adds thickness that fouls doors and fittings, and hides the condition of the substrate and membrane. Most renovators strip back in wet areas — if a contractor proposes tile-over-tile in the shower zone specifically, treat it as a cost-cutting red flag.

Around 10-20% is normal, sometimes more where custom vanities or imported fittings must be ordered up front — in that case pay the supplier invoice share, not a round 50%. Hold 5-10% back until the room has been used for a week or two and the snag list (grout gaps, silicone, door alignment) is closed.

Strip-out, then first-fix plumbing and electrics (pipes and cables in walls), then substrate preparation and waterproofing, then tiling, then second-fix (toilet, vanity, taps, shower screen, lights), then silicone and snagging. If a quote or schedule doesn't follow this order, question it — out-of-sequence work is how leaks and redone tiles happen.

A standard full bathroom renovation typically runs HK$60,000-HK$130,000, with basic refreshes from about HK$30,000-HK$50,000 and high-spec projects HK$150,000-HK$350,000. Small bathroom footprints don't make it cheap — demolition, waterproofing, and licensed trades dominate the cost.

You are, as the flat owner — water seepage cases between flats are among Hong Kong's most common building disputes, handled via the Joint Office (FEHD/BD) and civil claims. Insist on a named waterproofing system, proper curing time, and a written warranty from your contractor; it's your main protection.