Water Heater Installation & Repair in Pafos

A leaking tank can fail suddenly and flood, and any leak near electrics is hazardous. Shut off the unit's power (or gas) and its cold-water feed valve, then call a professional. A dripping pressure-relief valve specifically signals over-pressure or over-temperature — don't cap it.

Usually sediment buildup eating tank capacity, a failed lower heating element, or a broken dip tube mixing cold into the draw. All are diagnosable in one visit; sediment flushing and element swaps are routine repairs on a healthy tank.

Repair thermostats, elements, and valves on younger units. Replace when the tank shell leaks, the unit is past 8-10 years and needs a major part, or repair quotes exceed roughly a third of replacement cost. Efficiency gains from a modern unit often tip old-unit decisions to replace.

Yes: annual or biennial sediment flush, anode rod check every 2-3 years in hard-water areas, and TPR (pressure relief) valve testing. Tankless units need periodic descaling. Maintenance is the difference between an 8-year and a 15-year unit.

Like-for-like tank swaps take 2-4 hours. Fuel-type changes, relocations, tankless conversions, or units needing new circuits/venting run half a day to a full day plus possible permit inspections.

Storage tanks: 8-12 years (longer with soft water and anode-rod changes). Tankless/instantaneous units: 15-20 years with descaling. Heat pump water heaters: 10-15 years. A tank leaking from the shell itself is end-of-life — replace, don't repair.

Panels commonly run 15-20 years; the storage cylinder is the weak point at 8-12 years thanks to hard water. Cylinders can be replaced independently of panels — a fraction of full-system cost, so diagnose before replacing everything.