Roofing in Larnaka

Yes, over time — moss holds moisture against the surface, lifts tile and shingle edges, and accelerates frost damage. Have it removed by soft washing or manual scraping, never high-pressure washing, which strips granules and forces water under the covering. Zinc or copper strips slow regrowth.

Flashing is the metal detailing that seals joints — around chimneys, valleys, vents, skylights and wall junctions. These joints move and collect water flow, so flashing fails long before the main covering. If a roofer proposes reusing old flashing on a full replacement, push back.

Typically 10-30%, or enough to cover ordered materials, with the balance staged against progress and completion. Never pay in full upfront, and be wary of anyone who can start 'tomorrow' if you pay cash today — good roofers have lead times.

Often worth it: the access equipment is already up, edge details integrate cleanly, and combined pricing beats two separate jobs. If your gutters are under ten years old and sound, keep them — but have the roofer protect them during tear-off and note their condition in writing.

It scales with roof area, pitch, number of storeys, access, and material. Basic asphalt shingle or concrete tile sits at the bottom of the range; metal, slate and clay cost two to four times more. Tear-off of the old covering, disposal, scaffolding or edge protection, and hidden deck repairs are the lines that move a quote most — make sure all four are priced before comparing.

Repair when damage is localised — a few slipped tiles, one flashing leak — and the roof is under about two-thirds of its expected life. Replace when leaks recur in different places, more than roughly 30% of the covering is failing, or repair quotes start approaching a third of replacement cost. A good roofer will show you photos from the roof to justify either answer.

Flat-roof membrane waterproofing typically runs €20-€60 per m² (so €2,000-€6,000 for a 100 m² roof), while a tiled re-roof runs €60-€140 per m². Combined insulation and waterproofing adds more upfront but cuts both summer cooling and winter heating.

During the November-March rains — the long dry summer bakes and cracks exposed membranes, and the first heavy rain finds the damage. Inspect and repair in September-October when contractors still have availability.