Tiling in St. Albert

Ask tilers in St. Albert for photos of finished wet rooms and floor-to-wall junctions — lippage (uneven tile edges), crooked grout lines and bad cuts around fittings are where cheap work shows. Good tilers also talk about substrate prep and waterproofing before they talk about tiles.

Yes — tiles and grout are not waterproof; the membrane behind them is. Most countries mandate or strongly standardize wet-area waterproofing, and it must cure before tiling. If a bathroom quote doesn't mention waterproofing, that is the question to ask before anything else.

Confirm five things: substrate prep (levelling, boards), waterproofing in wet areas, adhesive and grout type, cuts and trims (edge profiles), and silicone to finish. Tiles themselves are usually excluded, and removing old tiles is a separate line that can rival the laying cost.

Removal is priced per square metre and depends on what's underneath: tiles on board come off fast, tiles on thick sand-cement beds are slow, noisy demolition work. Budget for substrate repairs after removal — you rarely know the wall or floor condition until tiles are off.

A full bathroom (floor plus walls) typically takes 3-5 days: prep and waterproofing first, then setting, then grouting after the adhesive cures. Add days if old tiles must come off or the substrate needs levelling. Rushing cure times is the classic cause of cracked grout later.

Either works, but you usually choose and buy tiles yourself and the tiler supplies adhesive, grout and trims. Order 10-15% extra for cuts and breakage (more for patterns and large formats) and keep leftovers for future repairs. Have tiles on site before the tiler starts.

On wood-framed floors and cracked or green concrete, yes — seasonal movement from freeze-thaw and humidity swings cracks rigidly bonded tile. Membranes (e.g. Schluter DITRA) are the accepted fix and most good tilers include them by default.