Roofing in Kamloops

Typically 10-30%, or enough to cover ordered materials, with the balance staged against progress and completion. Never pay in full upfront, and be wary of anyone who can start 'tomorrow' if you pay cash today — good roofers have lead times.

Flashing is the metal detailing that seals joints — around chimneys, valleys, vents, skylights and wall junctions. These joints move and collect water flow, so flashing fails long before the main covering. If a roofer proposes reusing old flashing on a full replacement, push back.

Yes, over time — moss holds moisture against the surface, lifts tile and shingle edges, and accelerates frost damage. Have it removed by soft washing or manual scraping, never high-pressure washing, which strips granules and forces water under the covering. Zinc or copper strips slow regrowth.

Yes — replacing one slope or section is common after localised storm damage and costs far less than a full reroof. The trade-offs are colour mismatch with weathered existing material and tying new work into old underlayment. It makes most sense when the rest of the roof has meaningful life left.

A typical asphalt shingle replacement runs CAD $8,000-$25,000 with most homes landing around $12,000-$15,000; metal roofs run $18,000-$50,000. Per-square-foot pricing of $5-$13 installed is typical for asphalt.

It's possible but not ideal — shingle adhesive strips need warmth to seal, and snow slows and endangers crews. Most contractors work April-November; winter work is usually limited to emergency repairs and ice-dam mitigation.