Kitchen Renovation in Edmonton

Open every door and drawer and check alignment and soft-close action; run the tap and check under-sink connections for weeps; test every appliance and outlet; check the benchtop for chips and sealant lines; confirm the splashback is sealed; and collect appliance warranties plus gas and electrical compliance certificates before releasing the final payment.

Design and cabinet order first (longest lead time), then strip-out, then first-fix plumbing, gas, and electrical, then walls, ceilings, and flooring, then cabinet installation, then benchtop templating and fitting (often a 1-2 week gap for stone), then appliances, splashback, and second-fix. The benchtop templating gap surprises most first-timers — plan interim use around it.

If the cabinet carcasses are sound and you like the layout, replacing doors, drawer fronts, hardware, and the benchtop delivers most of the visual change for roughly a third to half the cost of a full renovation. It is not worth it when carcasses are water-damaged, the layout fails you daily, or services need rework anyway — then you'd pay twice.

Replacing cabinets and appliances in place rarely needs a permit in Edmonton. Moving gas lines, altering drainage, removing walls, or adding circuits usually does, under your local building rules — and gas and electrical work must be done by licensed or registered trades in most countries. Ask the contractor to name the exact approval and who obtains it.

Appliances are the easiest item to self-supply because they are standardized and heavily discounted in sales — just lock in exact models before cabinets are ordered, since cabinet openings are built to them. Let the contractor handle anything built-in that affects warranty or gas/electrical certification, and agree in writing who is responsible if a self-supplied appliance arrives late or damaged.

Minor same-layout renovations run roughly CAD 12,000-30,000, full mid-range projects CAD 30,000-70,000, and major custom kitchens CAD 70,000-180,000 in large metros. These track US benchmarks adjusted to Canadian labour and CAD.

Interior kitchen work runs year-round, and Q1 is often easier to book with better pricing. The winter caveats are material deliveries in snow-affected regions and ventilation during finishing — both manageable if the contractor plans them.