Flooring Installation in Langford

Vinyl plank (LVP/LVT) is fully waterproof, so it is the safer choice for kitchens, bathrooms and laundries, and it is quieter underfoot. Laminate has a harder, more scratch-resistant wear surface and often looks more like real wood, but standard laminate swells if water sits on it. Prices overlap heavily, so choose by room use rather than price.

Order 8-10% more than the measured area to cover cutting waste, and 12-15% for diagonal or herringbone patterns. Keep a spare box after the job for future repairs — matching a discontinued product years later is difficult.

Waterproof materials: vinyl plank/tile, ceramic or porcelain tile, or specifically water-rated laminate. Standard laminate and solid wood swell when water gets into joints, so most installers will advise against them in wet rooms even if you like the look.

Subfloor prep means making the base flat, dry and sound: self-levelling compound over uneven concrete, replacing damaged boards or plywood, and adding a moisture barrier over slabs. Skipping it causes clicking joints, gaps and premature wear, and it voids most manufacturer warranties. It is normally priced separately per area, so ask every installer to inspect and price it before you compare quotes.

Ask every installer to itemise: material brand and wear-layer/thickness, underlay, subfloor prep, old floor removal and disposal, trims, beading and door thresholds, furniture moving, and waste allowance. The headline per-area rate is meaningless without those lines — most disputes come from prep and trims that one quote included and another did not.

Laminate and click-lock vinyl plank are usually cheapest overall: low material cost plus a fast floating installation that needs no glue or nails. Sheet vinyl can be even cheaper per unit but needs a very flat subfloor. Carpet is comparable but is normally quoted by carpet fitters rather than hard-flooring installers.

Installed laminate or vinyl plank typically runs CAD $4-$14 per square foot, engineered and solid hardwood roughly $10-$30. Labour alone is commonly $2-$6 per square foot, more for stairs and patterns.

Forced-air heating drops indoor humidity sharply in winter, shrinking wood boards; they swell back in humid summers. Acclimatisation before install, correct expansion gaps, and running a humidifier in winter (aim ~35-45% RH) keep movement acceptable.