Flooring Installation in Cloverdale

Yes. Solid and engineered wood (and to a lesser degree laminate) should sit in the room where it will be installed for 48-72 hours so it adjusts to local temperature and humidity. Skipping this step is a common cause of gapping and buckling months later. A good installer will schedule delivery a few days before fitting.

Solid hardwood can usually be sanded and refinished 2-3 times over its life, at a fraction of replacement cost. Engineered wood can typically take one light sanding if the top layer is thick enough. Replace when boards are cupped or rotten from water damage, or the wear layer is too thin to sand.

Vinyl plank (LVP/LVT) is fully waterproof, so it is the safer choice for kitchens, bathrooms and laundries, and it is quieter underfoot. Laminate has a harder, more scratch-resistant wear surface and often looks more like real wood, but standard laminate swells if water sits on it. Prices overlap heavily, so choose by room use rather than price.

Order 8-10% more than the measured area to cover cutting waste, and 12-15% for diagonal or herringbone patterns. Keep a spare box after the job for future repairs — matching a discontinued product years later is difficult.

Installed laminate or vinyl plank typically runs CAD $4-$14 per square foot, engineered and solid hardwood roughly $10-$30. Labour alone is commonly $2-$6 per square foot, more for stairs and patterns.

Forced-air heating drops indoor humidity sharply in winter, shrinking wood boards; they swell back in humid summers. Acclimatisation before install, correct expansion gaps, and running a humidifier in winter (aim ~35-45% RH) keep movement acceptable.