EV Charger Installation in British Columbia

Increasingly yes, but it needs building/owner-committee approval, a metering plan (charging billed to you), and sometimes shared load management. Several countries now have 'right to charge' rules limiting how strata bodies can refuse. Start with building management early — approvals take longer than the install.

Not always. A 7kW charger draws ~32A continuously — many homes can host it, especially with load-management (the charger throttles when the house is busy). Older or small-capacity supplies, or 22kW ambitions, trigger panel or supply upgrades. The installer's load calculation settles it.

Cable-run distance from your electrical panel to the parking spot, whether the panel has spare capacity or needs upgrading, wall vs pedestal mounting, and smart-charger features. The charger unit is often half the total; the electrical work is the rest.

A straightforward install — charger near the electrical panel, cable run under 10 metres — takes 2-4 hours. Long cable runs, panel upgrades, or three-phase work extend to a full day. The site survey (photos of your panel and parking spot) usually happens before quoting.

A dedicated home charger (7kW single-phase typical, 11-22kW three-phase) charges 3-10x faster than a standard socket, includes proper protection and load management, and is safe for daily use. Trickle-charging from ordinary sockets is a backup, not a solution — sockets aren't built for hours at sustained full load.

Yes — solar-aware smart chargers can divert excess solar generation to the car instead of exporting it. If you have or plan solar, choose a charger with solar-diversion mode; charging from self-generated power is usually the cheapest possible driving fuel.

Yes — certified Level 2 hardware is rated to -30°C and below, though charging is slower when the battery is cold and cable ergonomics suffer. Mount the charger sheltered where possible and choose a cable that stays flexible in deep cold.