Countertop Installation in Parc-Extension

Dry-cutting engineered (quartz) stone releases silica dust that causes silicosis, a serious lung disease — which is why fabrication must use wet-cutting and proper controls. This is a real, regulated workplace hazard; reputable fabricators take it seriously (see country notes).

After templating, fabrication takes about one to two weeks for stone; installation itself is usually a day. Plan for the gap between template and fit — you'll be without a worktop briefly, so coordinate with the rest of the kitchen work.

Look for: material and thickness, templating (a precise measure of your cabinets), fabrication (cut-outs for sink and hob, edge profile), delivery, installation, sealing if natural stone, and removal/disposal of the old top. A slab-only price hides the fabrication and fitting that make up much of the cost.

In Parc-Extension, expect the national typical per square foot or metre for your chosen material, with an island, complex cut-outs and premium edging pushing the total up. Ask for the price templated and fitted, not just the slab.

In Parc-Extension, view finished installs, get the price templated-and-fitted with all cut-outs and edging specified, and confirm who fabricates the stone. Compare quotes on the full installed cost per square foot/metre, not the raw slab price.

Quartz and sintered surfaces just need wiping; avoid excessive heat and harsh abrasives. Natural granite and marble need periodic sealing and are more stain-sensitive (marble especially). Ask the installer for material-specific care instructions and how often to reseal.

Quartz and granite commonly run CAD 50-130 per square foot installed; a typical kitchen lands at CAD 3,500-11,000 depending on material and island. Laminate is far cheaper.