Bathroom Renovation in Maple Ridge

Only in limited ways. Swapping a vanity, toilet, or taps in place works as standalone jobs, but anything touching the shower area, waterproofing, or tiling should be done in one hit — redoing tiles twice or breaking a waterproof membrane to add something later costs more than doing it together.

It can work on sound, well-bonded wall tiles and saves strip-out cost, but it fails on floors with movement, adds thickness that fouls doors and fittings, and hides the condition of the substrate and membrane. Most renovators strip back in wet areas — if a contractor proposes tile-over-tile in the shower zone specifically, treat it as a cost-cutting red flag.

Walk-in showers cost less to build than bath-plus-screen setups, use less space, and suit ageing-in-place. Keep at least one bathtub in the home if you may sell to families — in most markets a home with no bath at all narrows the buyer pool. If you have two bathrooms, the common answer is one of each.

Relocating a toilet means rerouting the soil pipe and adjusting floor levels; moving a shower means new drainage falls and full re-waterproofing. Either typically adds a meaningful share of the total budget and extra days of work. If your budget is tight, keeping the existing layout is the single most effective cost-saver.

Run every fixture: check drainage speed, look under the vanity for weeps, confirm the shower floor falls to the drain (pour a bucket and watch), check grout lines are even and silicone is continuous, and test the extractor fan. Photograph everything and get the waterproofing product and warranty terms in writing before releasing final payment.

Typical full renovations run CAD 12,000-28,000 with mid-range projects around CAD 18,000; budget refreshes start near CAD 5,000-8,000 and high-end or primary-bath projects reach CAD 40,000-70,000 in major metros. These track US Angi/HomeAdvisor figures adjusted to Canadian labour rates and CAD.

Yes — interior work is season-proof and many renovators discount January-March when exterior work stops. The main winter caveat is ventilation during tiling and curing; make sure the contractor plans for it rather than opening windows at -20°C.